LD 697
pg. 2
Page 1 of 2 An Act To Require the Installation of Dental Amalgam Separator Systems in Denta... LD 697 Title Page
Download Bill Text
LR 1054
Item 1

 
(2)__That the system is certified as meeting the
standards required in accordance with section 1661,
subsection 1-A;

 
(3)__Of the date upon which the system became
operational; and

 
(4)__Of the method of disposing of the material after
removal from the separator system.

 
If the amalgam separator system is connected to a publicly
owned treatment works, the dental office shall provide the
same notification to the director or chief engineer of
that facility.

 
C.__Installation, operation and maintenance of an approved
amalgam separator system by a dentist in accordance with
manufacturer's recommendations must fulfill the
requirements of this section.

 
D.__The department, after receiving proper notification of
the installation of the amalgam separator system and after
being satisfied that it meets the requirements of this
section must provide the dentist or the dental practice
with written confirmation of receipt of evidence of
compliance with this section in a format suitable for
display by the dental office.

 
Sec. 3. Standards. For purposes of the Maine Revised Statutes,
Title 38, section 1661, subsection 1-A, amalgam separator
systems must meet the standards contained in "ISO-1114:1999,
Dental Equipment - Amalgam Separators," published by the
International Organization for Standardization and in effect
on the effective date of this Act.

 
SUMMARY

 
This bill requires the installation of amalgam separator
systems in dental offices that add, remove or modify dental
amalgam. These systems must comply with the standards of the
International Organization for Standardization, ISO
11143:1999. Dentists must notify the Department of
Environmental Protection of their installations and must also
notify the director or chief engineer of a publicly owned
treatment works if their wastewater is discharged into a
publicly owned treatment works. Dentists need not comply with
these requirements until December 31, 2004.


Page 1 of 2 Top of Page LD 697 Title Page